Need Help? Call 813-831-4006, 941-981-0821
For other products from CP&S visit Lektrotech.com
Protects deep cell commercial and marine battery terminals from the harmful effects of Sulfuric Acid
In a car, boat, generator, etc. the battery supplies the electrical current that the starter motor requires to start the engine. It also provides power to the electrical components and accessories when the vehicle’s engine is off. When the electrical load exceeds the charging system’s capacity, the battery provides the extra current required. The battery also acts as a voltage stabilizer for the entire electrical system.
The white powder often found on a lead/zinc positive battery terminal is most often caused by over-filling the battery with either water or electrolyte. The electrolyte can weep from the plastic-to-lead seal in the battery case; if the battery is overcharged, sulfuric acid fumes will vaporize through the vent caps and react with the other metals. In addition, thermal expansion will force some of the liquid out of the battery vents causing a chemical reaction/corrosion.
Battery Pro works by creating a protective anti-corrosion thin coating that acts as barrier on the terminal and connectors to prevent the chemical reaction with other materials. Unlike the grease solutions often used today, Battery Pro does not absorb moisture.
For your convenience, Battery Pro comes with a cap brush assembly for easy application.
4 oz can - enough to treat 35 batteries!
Copyright © 2005-2018 Corrosion Pro. All rights reserved.
Website Design by Industrial Webworks LLC